Characteristics of 2024 aluminum plate

        The 2024 alloy aluminum plate is a typical hard aluminum alloy in the aluminum-copper-magnesium series. Its composition is more effective and the comprehensive type is good. Many countries produce this aluminum alloy, which is the most used carbon tool steel.

Wuxi Hengtai Aerospace Technology Co., Ltd. was established in 2001. It is an enterprise specializing in the processing and distribution of high-end aluminum alloy plates. Relying on more than ten years of industry accumulation and rigorous management system, it has won a good market reputation.

Next, I will show you the characteristics of 2024 aluminum plate:

With high compressive strength and certain temperature resistance, it can be used as working parts under 150℃. The temperature is higher than 125°C, and the compressive strength of 2024 aluminum alloy is higher than that of 7075 aluminum alloy. Forming characteristics are better under thermal conditions, quenching and new heat treatment conditions, and the heat treatment process enhancement effect is remarkable, but the heat treatment method is strict. The corrosion resistance is weak, but it can be reasonably maintained with pure aluminum coating; it is easy to cause cracks during electric welding, but the unique processing technology can be used for electric welding and riveting.

2024 alloy aluminum plate belongs to high-toughness carbon tool steel. It can be strengthened by heat treatment process. In the case of heat treatment and rigid heat treatment, the plastic deformation is moderate. The welding electric welding is excellent. There is a tendency to produce intergranular cracks when gas cutting. After hard bottoming and cold work, its workability is good, and the drillability after quenching is low: corrosion resistance is not high, and anodizing treatment and painting methods are often used or the surface layer is coated with aluminum to improve its corrosion resistance. 2024 aluminum plate is used to make a variety of long-time load parts and prefabricated components (but not including metal stamping steel castings) such as aircraft frame parts, skins, bulkheads, ribs, spars, bolts Wait for working parts below 150℃.