Characteristics of 7050 aluminum plate

7050 is a high-strength heat-treatable alloy with extremely high strength and resistance to spalling corrosion and stress corrosion cracking. Commonly used in aircraft structural parts for medium and thick plate extrusions, free forgings and die forgings.

Wuxi Hengtai Aerospace Technology Co., Ltd. was established in 2001. It is an enterprise specializing in the processing and distribution of high-end aluminum alloy plates. Relying on more than ten years of industry accumulation and rigorous management system, it has won a good market reputation.

Next, I will show you the characteristics of 7050 aluminum plate:

7075 aluminum plate is a cold-treated forging alloy with high strength and hardness, far better than mild steel. 7075 aluminum plate is one of the commercial strong alloys, with ordinary corrosion resistance, good mechanical properties and anode reaction. The fine grains make the deep drilling performance better, the tool wear resistance is enhanced, the thread rolling is more different from the weight, when the density requirement is small, the hardness requirement is relatively high.

    7075 aluminum plate belongs to the Al-Zn-Mg-Cu super-duralumin, 7075 alloy is an ultra-high-strength deformed aluminum alloy that has been used in the aircraft industry in the late 1940s and is still widely used in the aviation industry. It is characterized by good plasticity after solution treatment, particularly good heat treatment strengthening effect, high strength below 150 ℃, and particularly good low temperature strength; poor welding performance; stress corrosion cracking tendency; aluminum or other Protection processing use. Two-stage aging can improve the alloy's ability to resist stress corrosion cracking. The plasticity in the annealed and just-quenched state is slightly lower than 2A12 in the same state. It is slightly better than 7A04. The static fatigue of the sheet is sensitive to notches, and the stress corrosion performance is better than 7A04. Among them, the 7075-T651 state is especially the top grade and is known as aluminum. The excellent products in the alloy have high strength, far better than mild steel. This alloy has good mechanical properties and anode reaction, and is a typical aerospace and military special aluminum alloy material.